Search Site
Product Category List
 

Throughbolt Anchors

Throughbolt Anchors

Throughbolt Anchors are designed for use in concrete or dense natural stone of compressive strength greater than 20N/mm2 and are probably the most widely used anchor in the market.  The throughbolt requires a hole in masonry the same diameter as the bolt, allowing the hole to be drilled through the fixture avoiding lengthy marking out procedures and aiding rapid and accurate installation.  Throughbolts are a versatile, cost effective anchor combining ease of installation with good load carrying capacities.
• Drill Hole in Concrete • Clean Any Debris from hole • Tap the bolt throught the fitting into position • Tighten nut to the required torque


Items 1 to 10 of 53 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Descending Direction

Items 1 to 10 of 53 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Descending Direction